Home » » Installing A Sound Card The Easy Way

Installing A Sound Card The Easy Way




Sound Card installation is indeed simple and rather straight forward, that is,when you
know how to do it. Opening the system unit can be a scary task for some of us, especially
if we have not performed this task before.
The key is to be calm,take your time,and make it fun. Look forward to looking inside the
computer and see just how many components you can readily identify. Remember to touch
a doorknob or any grounded metal object to remove static electricity from your body. To
install your new sound card,let's perform the following.


Open The System Unit
Remove the system unit cover and locate an empty expansion bay. Note that the rear cover
of the slot may have to be removed on most computers. Before touching anything, ground
yourself to remove any buildup of electrical static charge from yourself. Touching the
computer case or a doorknob will do the job.
With the cover removed from the system unit,lay the computer on its side. You may have
to remove other connections or devices to have clear access to the empty card bay. Take
notes of any devices or connections that you make so that you can refer to them during
installation of the new card.
New sound cards must be installed in the PCI slot. After removing the small rear cover,
remove the new card from its protective wrap. This wrap is intended to keep the card away
from electrical static charge.
Installing The Sound Card
Grasp the card and align it with the PCI slot. Slowly but firmly press the new car
completely in the PCI slot. Check to be sure no part of the yellow contacts can be see when
the card is pushed in.
Secure the sound card to the system unit by using the screw that you removed when
removing the rear cover. Use this screw to secure the card to the case.
If you have on sound installed on the motherboard and you want to install another card,
most systems will disable the motherboard integrated sound. If not, consult your computer
manual to find the correct jumpers to disable the motherboard sound.


Now the cdrom audio cable must be connected. Insert one end of the audio cable for the
cdrom or dvd drive into the CD-IN socket of the sound card. The other end is inserted into
the audio-out socket of the cdrom or dvd drive.
Check and double check all connections before you replace the system unit cover. If all
connections are good, replace the cover and reboot the system after all peripherals are
reconnected.
Replace The System Unit Cover
The computer should automatically detect the new card and attempt to install the device
drivers needed to communicate with the card. Windows should prompt you to install the
software needed to allow the card to communicate to the computer.


The new card should have come with a cdrom with device drivers and other software for
the card. Simply inserted the cdrom in the cdrom drive and select the cdrom installation
when prompted.
Test the new sound card by re-booting the computer. You should hear the Windows startup
sound if the card is operational. In some cases,the new card will be operational without
rebooting your computer.
Installing or upgrading your sound card is that easy. You will need a quality speaker system
to take full advantage of your new sound card. Get a speaker system with a super woofer
for maximum sound quality.
Those new games and your new music cdroms will be much more exciting with that new
sound bursting from the new sound card.
If you're blessed enough to have two computers,install the card in the other system, at your
convenience. This will give you the added training of installing computer components.



0 comments:

Post a Comment

 
Copyright © 2014 Tips And Tutorial | Published By FadesMode Template | Powered By Blogger